Finisseur Pro Carbon Thermal Long Sleeve Base Layer Top Black

The Finisseur Pro Carbon Thermal Base Layer Top is made of Resistex Carbon yarn and polyamide. This base layer top offers breathability, ventilation, hygiene and comfort. Resistex Carbon was chosen because it is a yarn with unique technical characteristics that act on human thermodynamics. It is obtained by combining textile fibres with a continuous layer of conductive material based on active carbon, designed to improve the performance of athletes at all levels, by using fibre properties that alleviate fatigue and increase energy, thus showing better results than normal polyester sportswear. Three tangible benefits: reduction of oxygen demand, heart rate and lactic acid. Extensive studies in the field of ESD (Electro Static Discharge) have shown that the environmental insidiousness of variable electric fields affects all types of environments. The human organism is affected by the presence of these natural phenomena, accentuated by the urban environment.

The electrical charges that are dispersed in an athlete's body are responsible for numerous negative effects. Therefore, sports fabrics that include Resistex carbon yarn in their composition can prevent the discharge of electrical charges in the body, thus preventing muscle contractions, cramps and fatigue. Carbon improves the body's electrical performance by promoting blood circulation and the regular supply of oxygen to the cells, providing increased endurance and reducing fatigue in the muscles.
The other special feature of our yarn is the feeling of well-being, due to characteristics such as high conductivity. The presence of Resistex Carbon accentuates the level of moisture dispersion from the body, resulting in higher levels of sweat evaporation than with any other fabric, offering greater comfort to the athlete.

Features:
- Carbon yarn
- The OEKO-TEX 100 CLASS l certification guarantees the safety of the fibre for human health
- Temperature range: - 2ºC - 16ºC
- Material: 93% Q-Skin, 4% Elastane, 3% Resistex Carbon
- Made in Italy
- Unisex
- Weight: (size M)

Recommendations of use:
- Avoid pulling at the seams when putting on or taking off garments.
- Make sure you place the clothing correctly before you start cycling, especially around the pressure points, without forcing seams or other attachment points.
- Avoid getting close to branches, bushes, wires and other sharp objects that could damage your Finisseur garments.

Washing instructions:
- Wash your Finisseur garments immediately after each outing, or ventilate them thoroughly before storing them unwashed.
- To ensure proper care of the garment, it is recommended to machine wash at 30ºC maximum.
- Use the optimum amount of neutral liquid detergent (we recommend DPV Apparel Care laundry detergent) and do not add fabric softener or bleach.
- It is important to wash the garment inside out on a synthetic cycle.
- In case of heavy perspiration, we recommend rinsing the garment in cold water after each outing. This way you will get a better protection of the fibres against bacteria, which cause bad smells.
- Finisseur garments must not be stretched or wrung out, not even to remove excess water.
- Drying should be done in a warm and ventilated place, do not use a tumble dryer or radiators.

Storage:
- Do not leave your Finisseur garments to dry or store them in direct sunlight.
- Do not store your Finisseur garments in damp, enclosed spaces. Avoid storing clothes in plastic bags.